Home / Lacrosse Gear and Equipment

How to Restring a Lacrosse Stick: A First String Job, Step by Step

How to Restring a Lacrosse Stick: A First String Job, Step by Step

Photo: Pixabay / Pixabay

Restring, Repair, or Just Adjust: Decide Before You Cut Anything

Searchers asking how to restring a lacrosse stick fall into two groups. Some have a broken sidewall string or a pocket that has stretched into an illegal bag, and their stick truly needs a full restring. Others have a pocket that throws poorly because one shooter loosened or the bottom string stretched, and their stick needs ten minutes of adjustment instead. Pull the strings out of a good pocket and you have traded a small fix for a full string job, so diagnose first.

A full restring is justified when mesh is torn or hardened, when multiple strings are frayed, when the head is new and unstrung, or when the pocket shape is wrong in its structure, not just its depth. Adjustment is enough when the channel is straight and only depth or release timing has drifted. The steps below cover the full job for a mesh field stick, with the girls traditional and mesh differences flagged where they matter.

Tools and Materials

ItemWhat to buy or findNotes for a first job
Mesh pieceSoft or semi soft mesh for a first string jobHard mesh is harder to break in and less forgiving
String kitTop string, two sidewall strings, bottom string, shooting stringsKits match the string lengths to a field head
Scissors and lighterFor cutting and melting string endsMelt ends so they do not fray through holes
PliersNeedle nose, for pulling knots tightFingers alone leave loose interlocks
A ball and a screwdriver or dowelFor pounding and shaping the pocketShaping during the job beats breaking in later
Tape measure and a ballFor the final legality checkThe check differs between the mens and womens games
Interactive tool

Restring Quality Check

Check off each step as you finish it. Your progress stays on this page.

0 of 8 complete

0% done

Step by Step: The Full Restring

  1. Photograph the old pocket from front, side, and top if it threw well. Then cut or untie the old strings and remove the mesh.
  2. Fold the mesh to find its center row and attach the top string across the scoop, working from the center outward so the mesh sits symmetric.
  3. Pull the top string tight enough that the mesh cannot shift sideways. A loose top string ruins every later step.
  4. Start each sidewall at the top hole and work down, interlocking the mesh to the sidewall holes in a pattern that pulls the mesh down and forms the channel.
  5. Skip or double holes deliberately where you want the pocket to sit. The deepest point should sit just below the middle of the head for a balanced field pocket.
  6. Attach the bottom string loosely at first. It is your depth control: tighter raises the pocket, looser deepens it.
  7. Pound the pocket with a ball, then set the shooting strings across the top of the mesh, weaving them straight and snug but not tight.
  8. Throw twenty balls against a wall, adjust one string at a time, and only then trim and melt the string ends.

Forming a Channel That Throws Straight

A pocket throws straight when its channel guides the ball down the middle. If the ball rattles side to side on release, the sidewalls are too loose near the top. If it hooks upward, the top shooters are too tight or the pocket sits too high. If it throws into the ground, the pocket is too deep or the lowest shooter is acting like a ramp pointed down. Change one variable, throw ten balls, and record what changed. Stringing is a loop of small tests, not a single act of faith at the workbench.

Symmetry is the hidden variable. Count your interlocks on both sides and mirror them exactly. A pocket with one extra lock on the left will favor that side on every release, and no shooter adjustment fully cures an asymmetric foundation.

The Legality Check: Different Tests for Different Games

For a boys or mens field stick, place a ball in the pocket and look from the side: the top of the ball must not sit below the bottom edge of the sidewall. Deeper than that is an illegal pocket, and officials can check it at any stoppage. Also confirm the complete stick length, 40 to 42 inches for a short stick, because restringing is often paired with a head swap that changes nothing about length but invites a full check.

For a girls or womens stick, the test is stricter and comes in two parts. With the stick held flat at eye level, the top of the ball must be visible above the entire sidewall. With the stick turned upside down, the ball must fall out freely. Girls mesh and traditional pockets both must pass, and at 10U a modified pocket allows up to half the ball below the sidewall. A girls pocket strung like a boys pocket will fail, which is why girls sticks should be strung to the girls test from the first knot.

Breaking In and the First Week of Care

New mesh stretches most in its first week. Throw daily, keep the ball in the pocket overnight with the stick standing upright, and recheck depth after three sessions. Rain accelerates stretch, so a pocket strung in dry weather can bag out after one wet game. Carry the string kit in your bag for the first month. Most early fixes are a quarter turn of the bottom string or a shooter retied one row lower, both two minute jobs on a bench.

Worked Example: Fixing a Pocket That Throws Down

A midfielder restrings his stick and every pass dives. The channel is symmetric and the top string is tight, so the fault is depth: the ball sits so low it rolls under the lowest shooter and exits downward. He loosens nothing. Instead he tightens the bottom string by one hole on each side, raising the pocket slightly, and moves the lowest shooter up one mesh row. Ten wall throws later the release is flat. The lesson generalizes: throwing down is usually depth and shooter placement, while throwing up is usually a pocket that is too shallow or shooters cranked too tight at the top.

When to Pay a Stringer Instead

Pay for a professional job when the head is a goalie head with 12 diamond mesh, when a girls traditional pocket must be built with leathers and cross lace, when a tournament is this weekend, or when two home attempts have produced the same crooked channel. A good stringer sells consistency, and a backup stick strung to match your game stick is worth more than a third attempt at midnight before a game.

Traditional Pockets: The Other Restringing World

Everything above describes a mesh pocket. A traditional pocket is built from leathers and cross lace woven between them, and restringing one is a slower craft job. Leathers must be soaked, stretched evenly, and laced while damp so they dry to shape. The pocket forms a natural channel around the leathers, throws with a feel many girls and traditional boys players prefer, and demands more maintenance: leathers stretch when wet, tighten when dry, and need periodic adjustment to stay legal.

Girls players encounter traditional pockets most often, sometimes in combination with mesh runners. If your daughters stick is traditional and the leathers are cracked or the cross lace is frayed, a specialist stringer is usually the right call for a first restring, with home maintenance limited to small tension adjustments you learn by watching the stringer work once.

Restringing a Goalie Head Versus a Field Head

The goalie version of this job uses 12 diamond mesh across a head up to 12 inches wide, far more string, and a deeper functional pocket tested for rebound control and outlet trajectory. The sequence is the same family, top string center out, locked corners, sidewalls forming a channel, bottom string setting depth, but every tolerance is larger and every mistake shows up as a rebound or a sailing clear. The dedicated goalie stringing guide on this site covers that job in full, and a first timer should practice on a field head before attempting a game goalie pocket.

A Stringing Log Worth Keeping

Serious stringers write down what they did: mesh type, how many diamonds they locked on the sidewall, where the pocket sits, shooter count and placement, and how the stick threw afterward. One page per restring in a notebook turns your second job into a repeatable recipe instead of a fresh experiment. When a pocket is perfect, the log is how you build its twin for a backup stick, and when a pocket is wrong, the log tells you which single change to try instead of starting over in the dark.

The Pound-and-Roll Test After Restringing

Before the stick ever sees a practice, run two quick checks that reveal most stringing mistakes. For the pound test, press the ball into the pocket with your fist and push hard at four spots: below the scoop, at the mid-pocket, and against each sidewall. The mesh should give evenly everywhere; a hard shelf near the scoop means the top string is carrying tension that belongs further down. For the roll test, tilt the head slowly and let the ball roll from the throat toward the scoop. A well-strung channel guides the ball straight up the middle without rattling against either rail. A ball that clicks from side to side is showing you a channel that is too wide, and the fix is one more interlock on each side rather than tighter shooting strings.

Frequently Asked Questions

How often should you restring a lacrosse stick?

Restring when the mesh tears or hardens, when strings fray, or when the pocket can no longer be adjusted back to a legal, consistent shape. For a regular player that is often once a season or two, with small adjustments between full jobs.

How long does it take to restring a lacrosse stick?

A first careful job takes one to two hours, including pocket shaping and throw testing. Experienced stringers finish a standard mesh field pocket in about half an hour, but the testing throws are part of the job at any speed.

Can you restring a girls stick with a boys pocket?

No. A girls stick must pass the womens pocket tests: the top of the ball visible above the sidewall with the stick held flat, and the ball falling freely when inverted. A boys depth pocket fails both tests and is illegal in the girls game.

Why does my restrung stick throw into the ground?

Usually the pocket is too deep or the lowest shooting string sits too low, so the ball exits under it. Tighten the bottom string slightly, move the lowest shooter up a row, and retest with ten throws before changing anything else.

Is it cheaper to restring or buy a new complete stick?

Restringing with a kit costs far less than a new complete stick and keeps a head you already like. Buying new makes sense when the head itself is warped, cracked, or outgrown, not when only the mesh and strings are worn.