Home / Goalie Play

How to Dye a Lacrosse Goalie Head: The Big-Head Version of the Job

How to Dye a Lacrosse Goalie Head: The Big-Head Version of the Job

Photo: Pixabay / Pixabay

Why a Goalie Head Dye Job Is Its Own Project

Dyeing colors the plastic of the head itself in a hot bath of water and fabric dye made for synthetic fibers. A goalie head follows the same chemistry as a field head, but its size changes every practical step. A goalie head can be up to 12 inches wide at the top, far broader than a field head, so it needs a container that submerges the whole head at once, roughly double the dye to keep the color strong, and a full unstring and restring around the dye work. Plan half a day, not an hour.

If your current pocket is strung exactly the way you love it and you cannot reproduce it, stop here and dye a spare head instead. The mesh and leathers cannot stay in the head for the bath, and no photograph fully captures the tension of a broken in goalie pocket. Stringers treat a dye job and a restring as one combined project, and you should too.

Materials and Setup

ItemGoalie head specificationWhy it matters
ContainerWide stock pot or plastic tub that fits the full head flatA partly submerged head dyes in visible stripes
DyeSynthetic fiber dye, about double a field head amountThe larger bath volume dilutes color quickly
WaterEnough to cover the head by at least an inchFloating corners stay pale
Heat sourceStove for a metal pot, or near boiling water poured into a tubDye takes best in very hot, not boiling, water
Cleaning suppliesDish soap, old toothbrush, rubbing alcoholSkin oil and dirt block dye unevenly
ProtectionGloves, apron, cardboard under the work areaThis dye stains skin, counters, and clothing
MaskingElectrical tape or hot glue for designsBoth resist the bath and peel away after
Restring kitGoalie mesh, sidewall and top string, shootersThe head comes out of the bath unstrung

Work outside or in a garage if you can. The bath will splash when a wide head goes in, and a goalie head displaces far more hot dyed water than a narrow field head does.

Interactive tool

Goalie Head Dye Job Check

Check off each step as you finish it. Your progress stays on this page.

0 of 8 complete

0% done

Step by Step: From Strung Head to Dyed Head

  1. Photograph the pocket from the front, side, and back, then unstring the head completely, keeping the mesh only if you plan to reuse it.
  2. Wash the bare head in hot soapy water, scrub the string holes and the throat, rinse, and wipe it with rubbing alcohol.
  3. Mask any areas you want to keep white or a lighter color, pressing tape edges down firmly with a fingernail.
  4. Heat the bath until it steams steadily, stir in the dye until fully dissolved, and add a small squirt of dish soap to help even coverage.
  5. Lower the head in slowly, scoop first, and confirm it is fully covered. Add hot water if a corner floats above the surface.
  6. Keep the head moving gently every few minutes and check color every five minutes. Dark colors on white plastic commonly need twenty to forty minutes in the bath.
  7. Lift the head out with tongs, rinse in cool water until the rinse runs mostly clear, and let it cool and dry completely.
  8. Remove masking while the head is dry, inspect for pale spots, and re dip only if you accept that the whole head will go darker.
  9. Restring the head, break in the pocket, and run the outlet and rebound tests described in the goalie stringing guide on this site.

Color Planning for a Very Wide Head

Solid dark colors are the forgiving choice for a first goalie dye. Black, navy, royal, and deep green cover evenly and hide minor streaks. Light colors and pastels show every cleaning miss, and red shades can dry pinker than the packet suggests when the bath is diluted by a big container. Two tone fades are possible by dipping one end for the full time and the other end briefly, but a goalie head is heavy when wet and awkward to hold at an angle, so practice the motion with cold water first.

White heads take dye. Factory colored heads mostly do not change in a predictable way, because you are adding dye over an existing color. A black head cannot be dyed a lighter color at all. Check the head material as well: standard nylon heads dye reliably, while some specialty plastics resist the bath and finish blotchy no matter how clean they were.

Mistakes That Ruin Goalie Dye Jobs

The classic failure is the stripe: the widest part of the scoop rode above the water line while the throat soaked, and the head came out two tone by accident. The second failure is weak color from a bath sized for a field head, fixed only by starting with more dye. The third is rushing the restring, stringing a pocket into a head that was still warm and slightly soft from the bath. Let the plastic cool fully overnight if the bath was very hot.

Boiling water is the other danger. A hard boil can warp thin sidewall sections, and a warped goalie head will never string a straight channel again. Keep the bath steaming, not rolling. If you are using a plastic tub, pour in near boiling water and work promptly, because the bath will cool faster than a pot on a stove and the color will set lighter.

Legality and Game Checks After Dyeing

Dye changes color, not dimensions, so a legal head stays legal if the process did not warp it. Measure the head width after the job and check that the ball still moves freely through the throat and pocket. Some leagues and tournaments photograph team equipment for uniform matching, and a dyed head that clashes with team colors is a coach conversation to have before the bath, not after it. Goalies should also confirm that any required contrasting colors on equipment in their league are still satisfied.

Worked Example: A Navy Goalie Head, Timed

A white goalie head, unstrung and washed at ten in the morning, goes into a navy bath at ten thirty in a tub with two packets of synthetic dye. The first check at ten forty shows medium blue. The head stays in, turned every five minutes, until eleven ten, when it lifts out a deep navy. After rinsing and an hour of drying, masking tape comes off the throat logo area, leaving a clean white panel. Restringing takes the afternoon, and the goalie throws outlet passes the next morning to confirm the new pocket releases where the old one did. Total active work was under ninety minutes. Total project time was a day, most of it waiting, which is the honest shape of this job.

Designs That Work at Goalie Scale

Simple designs survive the size of a goalie head best. A solid color with a masked throat panel, a two color dip where the scoop takes a second shorter bath, and tape stripes across the scoop are all achievable by a first timer. Intricate lettering rarely survives, because tape edges lift in a long hot bath and dye creeps underneath. Hot glue designs are the patient alternative: draw the design in glue on the dry head, dye the head, then peel the glue away to reveal white lines. Test glue removal on the throat area first, where a mistake hides under the shaft tape line.

Team color planning deserves one caution. A goalie head is the largest single piece of visible equipment on the field, so a color that clashes with the team uniform will be noticed in every photograph and by every official checking equipment contrast. Show the coach a dye sample photograph of the planned color before committing a game head.

Dyeing a Used Head Versus a New Head

A used head carries invisible problems: sunscreen, field dirt ground into the string holes, and micro scratches that grab dye darker than the surrounding plastic. Wash it twice, once with dish soap and once after a soak, and accept that a used head finishes with more character than a new one. A brand new head sometimes carries a mold release sheen that resists dye in patches. The alcohol wipe in the main steps exists for exactly that sheen, and skipping it is the usual reason a new head comes out cloudy in one area.

If the head has been dyed before, remember that dye is additive. A second bath can deepen or shift the color, never lighten it, and two different dye colors layered together often finish muddy. Plan multi color heads from white in a single session rather than across two seasons.

Disposal and Cleanup That Keeps the Household on Your Side

Let the bath cool fully, then dispose of it according to your local guidance for household dye, usually down a drain with plenty of running water, never onto a garden or into a storm drain without checking local rules. Wipe the pot or tub immediately; dye that dries on enamel is a weekend project of its own. Keep the dyed head off light colored car seats and carpets for the first week, because fresh dye can transfer faintly when the plastic gets hot in a parked car.

Reading the Result: What the Finished Color Tells You

Judge the job under daylight, not under a garage bulb, because warm indoor light hides weak uptake. The sidewall rails and the throat take dye at different speeds on most goalie heads, so compare those two zones first: even color on both means the bath stayed hot and the plastic went in clean. A pale patch shaped like a thumbprint almost always traces back to skin oil that survived the wash, and a cloudy swirl usually means the head rested against the pot wall above the waterline for part of the soak. Neither flaw needs a full restart. A short second bath at full temperature deepens the whole head evenly, while a spot that still refuses color after two baths is telling you the surface itself is sealed, and further soaking only risks warping the plastic.

Frequently Asked Questions

Can you dye a lacrosse goalie head without unstringing it?

Not well. Mesh and strings block the bath, soak up dye unevenly, and come out stained and stiff. A goalie head should be fully unstrung, dyed bare, and restrung as part of the same project.

How much dye does a goalie head need?

Plan on about double the dye you would use for a field head, because the container and water volume are larger and dilute the bath. Weak, pale color is almost always a sign the bath was too dilute.

What colors dye best on a goalie head?

Dark, saturated colors on a white head are the most reliable: black, navy, royal blue, and deep green. Pastels and light shades show streaks and cleaning misses, and a factory colored head cannot be dyed lighter.

Will hot dye water warp a goalie head?

It can if the water is at a hard boil. Keep the bath steaming hot but not rolling, move the head gently instead of forcing it, and let the plastic cool completely before restringing.

Is a dyed goalie head legal for games?

Yes, if the head was legal before and the dye process did not warp its dimensions. Recheck the width and pocket after restringing, and confirm any league equipment color rules with your coach first.